MT3 sets  VT-W2 12"...  w12 colle...  jacobs 33  Vacuum Ta...
 
 
 

wholesales 10pcs C3/4 ER16 1.38 Straight collet chuck holder CNC Milling Lathe
$119.9

wholesales 10pcs C3/4 ER16 1.38 Straight collet chuck holder CNC Milling Lathe New 10pcs C3/4 ER16 1.38 Straight collet chuck holder shank diameter : .75" shank length:1.38" Flange diameter :1.5" ER16 bore ,clamping up to 10mm ,item includes 10pcs holder 10pcs collet nut as picture show Precision : 0.01mm Made in high sping carbon st ...  More
New 5pcs C3/4 ER20 A 1.38 Collet Chuck Straight Collet Chuck CNC Milling Lathe
$69.99

New 5pcs C3/4 ER20A 1.38 Collet Chuck Straight Collet Chuck CNC Milling Lathe 5pcs of this 3/4 ER20 1.38L Straight collet chuck Brand new C3/4 Er20 A extension shank collet holder Shank d : 3/4 (0.7'5 ) Shank length : 1.38 Flange : 1.5" precision : 0.01mm/0.0003 shank has hole thru the shank with 10mm (without drawbar thread ) ER20 Clamping range : ...  More
Mueller Kueps 745100 Wrench Extender
$52.15

Mueller Kueps 745100 Wrench Extender Mueller Kueps 745100 Wrench Extender International Customers: All electronic products are packaged for sale in the US with US voltage. This item is brand-new, factory sealed. Features and Benefits Will work on almost any wrench To loosen tight connections on hard to reach areas Drop forged Extra 1/2" square ...  More
1m Length OD 3mm ID 2mm PTFE TEFLON Tubing for reprap mk 4 iv hot end
$6.07

1m Length OD 3mm ID 2mm PTFE TEFLON Tubing hose for reprap mk 4 iv hot end PFTE (Polytetrafluoroethylene) is most commonly known as "Teflon" a brand name of the material produced by Dupont. It is a self-lubricating that offers the lowest coeffecient of friction of any material. It also has astonishing chemical resistance along with a service operat ...  More
Grey Pneumatic 1104E 3/8" Drive 4 Piece Impact Extension Set
$38.9

Features and Benefits: Includes 1-3/4", 3", 6" and 12" length extensions Molded storage case Lifetime Warranty (Individual Parts Only) On Aug-21-17 at 13:38:30 PDT, seller added the following information:
1" Drill Extension 1/4-28 Dual Threaded extension fits 90 Degree drill
$7.95

1/4 - 28 dual threaded drill extensions, One 1" extension with 1/4-28 female threads on one end and 1/4-28 male threads on the other end. Outside diameter is 3/8". All extensions have been tested. The threads are clean, the extensions are straight and in good working condition. There may be engravings or part numbers on the extensions. I combine sh ...  More
New Black Horse Tail Hair Extension 85cm-90cm 1Lb
$59.9

Gearwrench 84927N 3 Piece 3/8" Drive Impact Locking Extension Set
$39.56

1m Length 1/4'' OD 6.35mm ID 4.35mm PTFE TEFLON Tubing Tube Pipe hose per meter
$7.02

Craftsman 1/4" Socket Adapter 1/4" Hex Shank 25592 3PKS
$3.75

Gearwrench 84438N 3/8" Drive Impact Locking Extension - 33"
$37.54

12" - 1/4" Screwdriver bit holder Flexible Extension Bend Drive
$11.83

GearWrench 82803 Male Extension Adapter 3/8" Drive (2 Packs)
$4.5

New D16mm L100mm PTFE Rod Teflon Round Bar virgin sealing gasket insulation Dia
$9.9

Extension Carbide Burr Tool Holder Collet 1/4" Extender Engine Porting Welding
$39.95

2m Length OD 2mm ID 1mm PTFE TEFLON Tubing Tube Pipe hose 2meter
$7.59

1m Length OD 4mm ID 3mm PTFE TEFLON Tubing Tube Pipe hose per meter
$5.5

GearWrench 3/4" x 16" Socket Extension Bar 81413
$10.0

1m Length OD 8mm ID 6mm PTFE TEFLON Tubing Tube Pipe hose per meter
$7.02

5m Length OD 6mm ID 4mm RED PTFE TEFLON Tubing Tube Pipe hose
$27.07

[1] 
ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  iso40  v-800  D1-4  101106  sip  magic chu...  ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  ARMSTRONG  ext100  circle  magic  v-800  deckel  blank  knee  1062  cxa  b12  b12  iso 40  flash  valenite...  valenite...  NT30 er25  fanuc  tap holde...  JT1  er16 coll...  ban.. | er16 coll...  mt2 colle...  mt2 colle...  Wohlhaupt...  ID Collet...  face mill  MT3 er40  MT3 er40  MT3 er40  MT3 er40  MT3 er40  MT3 er40  Titanium  MT3 er40  fanuc  MT3 er40  Hsk63f  10ee  10ee  10ee  er11  mt3  vdi  sclcr  sclcr  sclcr  MT3 er40  10ee  10ee  cnc lathe...  er25 coll...  lathe chu...  smw  and 1>1...  smw  ARMSTRONG  10ee  and 1>1...  vacuum ta...  vacuum ta... 
Copyright © 2003 - 2018 worktoolholding.com (8191) | All rights reserved b.